How To Apply & Store Car Magnets
(Custom Printed, High Quality, Full Color and Personalized Car Magnets) custom full color vinyl banners, car magnets, static window clings, posters, banners

How To Apply Car Magnet
• Before applying Car Magnets, Truck Magnets, and other magnetic car signs, test all inks and paints used on the surface for adhesion and solvent compatibility.
• Affix to car magnet to smooth, flat or gently curved metallic surfaces.
• Make sure the entire car magnet or magnetic car sign is flat against the metal surface. Do not place car magnet over protrusions (molding, decals, pin striping, etc.) or concave areas. There must be NO air pockets.
• The car magnet itself should be at a room temperature of 60°F (16°C) or above when installed to
achieve best results.
• Do not apply car magnet that has been curled with the magnet side out. The car magnet may not
attach properly to the metallic surface resulting in lifted corners or air gaps which will weaken
its holding strength. Follow instructions for Storing Flexible Magnet.
• If you place the car magnet in the wrong position, completely remove the magnet from the
surface and reaffix. Lift at sides and not at corners to remove. Do not pull the car magnet across
the surface, or it may stretch due to the resistance caused by the high magnetic strength.
• Do NOT use magnetic car signs on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods), temperatures exceeding 160ºF (71ºC) or temperatures below -15ºF (-26ºC).
Exposure to cold weather will make the magnet more brittle so use caution when handling.
• Be aware that long-term use on surfaces frequently exposed to sunlight (such as vehicles)
can result in uneven fading of the surface because the car magnet-covered area is shielded
from ultraviolet rays.
• Do NOT use magnetic car signs on non-metallic body fillers, simulated wood grain siding and repainted surfaces.
NOTE: Doors and panels on some vehicles are not made of steel. This product (magnetic car and truck door signs) will not work on aluminum and plastic surfaces.
• We manufacture our Custom printed, High Quality, Full Color magnetic car signs with rounded corners for magnetic vehicle signage.

Cleaning Flexible Magnet
• To guard against moisture and dirt buildup between the car magnet truck magnets and all magnetic car signs and the metal surface (particularly on outdoor applications), remove the magnet at regular intervals. Cleanboth the magnet and metal surface with mild detergent; wipe with a soft cloth or allow to air-dry. (For vehicle-mounted signs, remove and clean DAILY.)
• After waxing and polishing, allow 2 days for wax to cure before applying car magnet signs.